PRODUCTS
Leak and Leak/Flow Testers

TME Worker

Pressure or Vacuum Decay Leak/Flow/Occlusion Tester
  • Affordable, operator-friendly, repeatable
  • Available in Leak, Leak/Flow or Leak/Occlusion configurations
  • High resolution (0.0001psi or 0.01 mbar/sec)
  • PLC controls, two-way RS-232 communication capability, Ethernet connectivity available

TME Solution

Pressure or Vacuum Decay Leak or Leak/Flow Tester
  • One to four channel, concurrent or sequential testing
  • High resolution (0.0001psi or 0.01 mbar/sec)
  • CFR Part 11 data protection, meets ASTM and NIST standards
  • PLC controls, two-way RS-232, Ethernet connectivity

TME Industrial Solution

Multi-Port Leak or Leak/Flow Tester for Industrial Environments
  • All the features of the TME Solution, but safe for harsh, wet or dusty industrial environments
  • Available in NEMA-4 enclosure
Leak and Flow Test Systems

TME Solution-C

Non-Destructive Chamber Pressure or Vacuum Decay Test System
  • Non-destructive pressure or vacuum leak testing – reclaim good product
  • Detect holes as small as 5 microns in sealed products or non-porous packages
  • Test chambers customized to your product or package

TME Solution-CB

Non-Destructive Test System for Induction Welded Seals
  • All the features of the TME Solution
  • Pharmaceutical, nutriceutical and food bottles regardless of shape or size
  • Interchangeable fixture inserts to accommodate varying bottle sizes

TME Solution-C-BC

 

Non-Destructive Test System for Blister Cards
  • All the features of the TME Solution
  • Customized test chambers to accommodate your particular needs
  • Interchangeable fixture inserts for a variety of sizes and shapes
  • Gross leak detector built in to detect open or broken seals
Package Testers

TME BT-1000

Automated Package Tester
  • Performs seal strength and leak integrity testing on non-porous packages
  • Performs burst and creep testing for porous or non-porous packages
  • Meets ISO-11607 and ASTM standards
  • Quantitative test results, datalog and graphic presentation

TME BT-1000-100

High Pressure Automated Package Tester
  • All the features of the TME BT-1000
  • Test pressures up to 100 psi
  • Ideal for testing plastic laminate or metal pharmaceutical tubes

TME BT-1000-005

Low Pressure Automated Package Tester
  • All the features of the TME BT-1000
  • Low pressure creep and creep-to-failure tests
Gas Leak Detectors

Model 3000

Gas Check 3000 Series
  • Pin-point leaks, automatic display of leak rate
  • Choice of units, detects all gases
  • NAMAS and NIST traceable
Model 3000is Intrinsically Safe Gas Leak Detector
  • All the features of the Gas Check 3000 
  • BASEEFA approved intrinsically safe
Model 5000is Intrinsically Safe Quantitative Leak Detector with Storage Outputs
  • 20,000 data points with time and date in Datalog
  • NAMAS and NIST traceable, BASEEFA approved intrinsically safe
Model R2 Leak Detector for Refrigeration and Air Conditioning Components
  • Detects CFC, HFC, HCFC at very low leakage rates
  • Calibration to NAMAS or NIST standards
Standard Fixtures

TS-01
TS-01HP

Open Package Test Fixture, 12 inch
  • For flexible package seal strength measurements
  • TS-01 for peelable seal pouches, TS-01HP for film/welded seal pouches

TS-02

Closed Package Test Fixture
  • For closed package seal strength and leak integrity measurements
  • Includes probe assembly and package access kit

TS-03

Test Probe and Air Lines Assembly, ¼ inch

TS-04

Open Package Test Fixture, Manual, 24 inch
  • For large flexible package seal strength measurements (up to 24" pouch)
  • Manual clamp bar meets ASTM standards

RS-01/02/03

Radial Sealing Fixture, 1 to 4 lumen Sealed leak tight access or dead end for testing tubular products
  • Can accommodate diameters of 0.022 to 6.000 inches

RPF

Restraining Plate Fixture
  • Stabilize expansion during pressure decay leak testing
  • Provides consistent stress loading on all seals during seal testing
  • Variety of sizes and gap widths to accommodate your package
Accessories

PA-02/03

Package Port™ Package Entry System
  • Maintains leak tight path between product and test instrument
  • Used for restrained or unrestrained package testing

LA-01

Calibrated Digital Flow Valve
  • For functional leak calibration
LA-03 Foot Switch Actuator
LA-04 Calibrated Leak or Flow Orifice Available 10um and larger
  • Flow rate certified to NIST traceable standards

LA-05

Filter Set
  • Removes oil, moisture and particulate matter from air lines
  • Protects your test instrument
DSF-xx Dual Switching Fixtures
  • Low flow or high flow
  • Connect two test parts for sequential leak testing
TAL-3.0 Data Transfer Software
ETX-01 Step Down Transformer, 220/110 VAC, 50/60 Hz
ABC-150-11 Power Line Conditioner
  • Protect your test instrument from power surge or fluctuations
© Copyright 2008 - TM Electronics, Inc. - All Rights Reserved
air flow testing, air leak detection, air leak test, air pressure decay, blister testing, bubble leak testing of porous packaging, burst strength test, burst testing, card and blister packaging, component leak testing, compressed air leak testing, creep rupture testing, creep testing, creep to failure, fda qsr, flexible packages, flow testing, gross leak and fine leak testing, how to do package design testing, induction seal testing, iso 11607, leak detection, leak rates, leak testing, mass flow, medical devices, medical package testing, membrane burst strength test, package integrity testing, package testing, packaging, pressure decay, quality control, seal strength testing, seals, t.m. electronics, tm electronics, vacuum leak testing, validation, why package testing