LA-01
Calibrated Digital Flow Valve
For
functional leak calibration, the LA-01 is
a fine metering valve with digital handle
for reference values. The LA-01 is calibrated
to your pressure specifications and NIST traceable.
LA-03
Foot Switch Actuator
An
electrical footswitch may be added for connection
to the instrument "accessory"
port for remote cycle actuation. A pneumatically
operated switch is available for high EMI
environments.
LA-04
Calibrated Leak and Flow Orifice, 0.0003
to 0.0035 in.
Fixed
orifice flow standards are available for
a broad range of flow or decay requirements
Flow rate certification to NIST traceable
standards is supplied.
Specification Sheet - PDF
LA-05
Filter Set for removing oil, moisture,
and particulate from air line
Filters
and dryer are included to provide clean,
dry air to instrument standards.
Specification Sheet - PDF
DSF-25
Low Flow and DSF-50 High Flow Dual Port
Switching Valve Assemblies
The
DSF is a two-way valve assembly that allows
connection of two test parts for leak testing.
Available for either low flow or high flow,
the valve operates so as to alternately
cycle the instrument "Test Port"
to one product port or the other. Each test
will be an independent result. A separate
housing and connection ports are supplied
with the instrument. A cable and connector
attach to the "Accessory Port"
located on the instrument back panel.
TAL-3.0
Data Transfer Software
Keystroke
conversion software allows instrument data
log information to be directly loaded into
spreadsheet formats.
ETX-01 European Step Down Transformer
220/110 VAC, 50/60 Hz
ABC-150-11 Power Line Conditioner
Highly
recommended by TME to protect instruments
from power surge and power line fluctuations.
|
