Products - Solution CB™

Back to Product List

 

Brochure and Specification Sheet PDF

2D AutoCAD Drawings
AutoCAD | Acrobat

3D Downloadable Drawing Files
IGES | STEP | Parasolid | Self-Extracting eDrawing

TME Solution™ Leak/Flow Tester

Request for Quotation or Information
The TME Solution-CB™ Induction Welded Seal Test System produces quantitative test results on pharmaceutical, nutriceutical or food bottles by combining the sensitivity of non-destructive pressure or vacuum decay leak testing with the simplicity of sealed fixtures. This highly sensitive method uses a proprietary chamber design to find leaks in walls or seals of common bottle sizes widely used in industry today, including those with various shapes and neck or screw sizes. Customized test chambers accommodate your particular process needs, bottle sizes and shapes to detect holes as small as 5 microns. Interchangeable fixture heads enable you to test a variety of bottle sizes and shapes with one test system.

TME Solution-CB™ Chamber Test System: A  Sensitive, Repeatable, Non-Destructive Bottle Seal Tester
  • Fixture heads provide the test chamber and are custom designed and manufactured using a proprietary technique that maximizes the sensitivity of the test on your particular welded seal.
  • Access door interlock and two-hand anti-tie-down zero-force safety controls ensure a safe operating environment.
  • Highly repeatable, quantitative results from non-destructive vacuum or pressure decay leak testing of induction welded seals, avoiding the loss of good product through testing. A Gross Leak Detector that finds open or broken seals is built into the leak test.
  • A variety of units of measure are available including PSI, InH2O, kPa, and mbar. CFR Part 11 Data Protection is standard in the TME Solution-C instrument, and calibration is NIST traceable
  • Two way RS232 computer connection is standard for data collection and remote parameter control; Ethernet connectivity is available to allow data to be transmitted from the instrument to a LAN.

Home | Products | Company Background | News & Events | Press Releases | Service
TME Resources | Tools | Contact Us | Site Map
Leak Testing 101 | Package Testing 201 | Leak Testing 301

TM Electronics, Inc.
45 Main Street , Boylston, MA 01505
Tel: (508) 869-6400 | Toll Free: (800) 370-0501 | Fax: (508) 869-9955

© Copyright 2008 - TM Electronics, Inc. - All Rights Reserved
Site by Homepage Success, Inc.
air flow testing, air leak detection, air leak test, air pressure decay, blister testing, bubble leak testing of porous packaging, burst strength test, burst testing, card and blister packaging, component leak testing, compressed air leak testing, creep rupture testing, creep testing, creep to failure, fda qsr, flexible packages, flow testing, gross leak and fine leak testing, how to do package design testing, induction seal testing, iso 11607, leak detection, leak rates, leak testing, mass flow, medical devices, medical package testing, membrane burst strength test, package integrity testing, package testing, packaging, pressure decay, quality control, seal strength testing, seals, t.m. electronics, tm electronics, vacuum leak testing, validation, why package testing