TM
Electronics, Inc.
45 Main Street
Boylston, MA 01505
For
Immediate Release
07/15/02
Contact: Stephen Franks
Tel: (508) 869-6400
Fax: (508) 869-9955
Email: stephen.franks@tmelectronics.com
Website: www.tmelectronics.com
BT-1000-100
Automated Package Tester -
High Pressure Seal Strength and Leak Tester
Boylston,
MA: The TM Electronics BT-1000-100 High Pressure
Package Tester enables seal strength and leak
integrity testing using test pressures up to 100
psig. Operator control of critical variables and
quantitative measuring methodology yield highly
repeatable and precise results. The BT-1000-100
has eight test modes to perform both Leak Testing
and Seal Strength Testing on the same test item
without changing the setup, the test item or the
instrument settings.
The
BT-1000-100 provides test pressures up to 100
psig with the standard graphic plot of test pressures
and built in SPC analysis programs. The TME BT-1000-100
is the only high pressure test instrument to provide
graphic results of individual seal strength and
package integrity tests. SPC analysis of up to
1000 tests in the data log will provide mean,
standard deviation, control charges and histogram
for maximum, proactive process control.
The
internal volume of a package can be connected
directly to the BT-1000-100 Automated Package
Tester by using the patented Package Port System
and penetrating test probe to establish a leak
tight path. In a common application, a custom
screw cap adapter can be attached to a tube and
the BT-1000-100 to apply pressure directly to
the tube internal volume. Either method will apply
a controlled pneumatic pressure to the tube internal
volume to perform a "burst" test on
end and side seals, or apply a fixed pressure
and perform a sensitive pressure decay leak test.
The
TMElectronics Applications Specialists can help
you to determine the best method of testing your
particular product. Call, or visit us on our website.
Back to List
|
