Leak, Flow and Package Testing Industries and Applications | TM Electronics

Industries and Applications

Leak Testers and Flow Testers for the Industrial and Appliance Industry

We at TME understand that implementing a leak test system for industrial or appliance testing often requires some creative problem solving. The TME engineers and designers have dealt with issues involving minimizing testing time, integrating the leak tester into automated production equipment and designing fixtures to specifically accommodate the product being tested. The TME Solution™ Leak and Flow Tester is the height of flexibility to enable our engineering staff to meet your needs.

The TME Solution-C Non-Destructive Chamber Leak Test System is a non-destructive method to use pressure or vacuum decay leak testing to leak test closed, non-porous products or packages and will save product loss that accompanies destructive leak testing.

Leak Testers and Flow Testers for Automotive Component Manufacturers

We at TME understand that implementing a leak test system for automotive component manufacturers often requires some creative problem solving. The TME engineers and designers have dealt with issues involving minimizing testing time, integrating the leak tester into automated production equipment and designing fixtures to specifically accommodate the component being tested. The TME Solution© Leak and Flow Tester is the height of flexibility to enable our engineering staff to meet your needs.

Leak Testers and Flow Testers for Food Packaging Applications

TME is aware of the many variations on the need to test food packaging, such as the degree of permeability of the package and the strength of the seal to withstand transport and storage stresses. Package testing can be regarded as a two part process. Your package testing system should include both package integrity (leak) testing and seal strength testing, two complementary but very different procedures. To ensure that no contamination will occur during transport and storage of your product, both testing modes are important in the final analysis of your primary food container. The TM Electronics BT Integra-Pack or the BT-1000 Automated Package Tester provides seal strength and package integrity testing capability in one instrument, and also provides the documentation necessary for your packaging process validation, for in-process inspection or post-process audit testing.

We at TME know that it is just as important to test your packaging as it is to test your product. If you are new to package testing or would like your vocabulary refreshed, we encourage you to browse our informational brochure, Leak, Flow and Package Testing 101.

Leak Testers and Flow Testers for Medical Devices

We at TME have over 25 years of experience and tested thousands of medical device and package designs.  We understand that implementing a leak and/or package test system for medical devices is more complex than at first glance, and TME has designed our product line of test instruments with this in mind. For example, the design of a multi-lumen catheter must permit each lumen to be tested during its production. Any testing, therefore, should be conducted on each lumen of the catheter. An approach to leak testing suitable for leak testing blood bags, for example, could not be used if your product is a cannula or a catheter. There are many questions to consider when designing and implementing a leak tester system for your medical device or product.

TM Electronics was the first company to recognize the need for electronic, quantitative quality data in testing medical packages.  Since 1987, TM Electronics has provided seal strength and package integrity testers.  The US FDA now requires that packages are tested to the same quality level as the medical device it holds. If you are new to package testing or would like your vocabulary refreshed, we encourage you to browse our informational brochure, Leak, Flow and Package Testing 101.  There are also several technical journal articles in the “Resource” section of the web site.

Leak Testers and Flow Testers for Pharmaceutical Industry Use

We at TME understand that documentation issues related to CFR Part 11 are complex and critical, and have designed our TME Solution Leak and Flow Tester with this in mind. FDA regulations mandate process validation, "establishing documented evidence which provides a high degree of assurance.  The TME Solution, the TME Solution-C Closed Chamber Test System, the TME Worker Integra and the TME Worker have all been designed with additional security levels that prevent any attempt to alter data. 

In addition to package testing, time and money can be lost if product is manufactured while there is a leak or occlusion in the process equipment such as a mixing tank or production pipe. TME leak testers and flow testers provide high performance, cost effective solutions when process elements are tested for leak and flow integrity.

The TME Solution-C  Non-Destructive Leak Test System can help you to avoid loss of good product during testing while providing high resolution, repeatable, sensitive test results for induction welded bottle seals, blister cards and other pharmaceutical packaging.

Leak, Flow and Package Testing Industries and Applications | TM Electronics
leak flow industries, leak flow applications, tm electronics, manufacturing
TM Electronics understands...