Restraining Plate Fixture | TM Electronics

Restraining Plate Fixture

For Leak Testing

and Seal Strength Testing

of Flexible, Non-Porous Packages

Use with the TME BT-1000 Automated Package Tester  or TME BT Integra Pack for:

Leak Testing: Restraining stabilizes expansion during pressurization. Semi-porous surfaces are available to test without blocking any holes in the surface material.

Seal Strength Testing: Restraining plate fixtures provide consistent stress loading on all seals of open ended or closed packages

 

  • Restraining plates limit the tested internal volume of the package, can increase the sensitivity of the test.
  • Restraint equalizes the stress on package seals being tested, and controls stretching expansion when pressurized
  • Restraining plates can be used with the TME TS-01/04 Open Package Fixtures to test open ended packages
  • Closed packages can be restrained and tested with the TME Package-Port package entry system
  • Restraining gap adjusts from 1/4 to one inch to accommodate most package sizes. Other gap sizes are available on a custom basis.
  • Restraining Plate Fixtures from TME conform to ASTM testing standards
  • Standard size is 12" x 16" with custom sizes available. 

 

Restraining Plate Fixture | TM Electronics
automated test equipment, automatic test equipment, bt-1000, bt 1000 tm electronics, burst tester, calibration, cosmetics tube burst testing, creep tester, creep to failure tester, cup foil lid burst testing, es-1000, es7-1000, flow measurement testing, leak detection equipment, leak detection method, leak detection system, leak detectors, leak flow tester, leak testers, leak testing automation, leak testing equipment, leak testing systems, mass flow leak detectors, mass flow leak testers, mdt-50, mdt-500, non-porous package tester, package integrity testers, package creep tester, package tester, package testing for medical devices, package testing methods, pressure decay equipment, pressure decay measurement, pressure decay testing, solution leak tester, tme solution, tube seal burst testing, testers, vacuum leak detectors
Restraining Plate Fixture for leak testing and seal strength testing of flexible, non-porous packages. Use with the TME BT-1000 Automated Package tester or TME BT integra pack. Restraining plate fixtures from TME conform to ASTM testing standards. Call @ 1-800-370-0501 or Email:sales@tmelectronics.com.