TS-02 Open Package Test Fixtures | TS-01-EXP 12" & TS-04 24" to 48" Manual Fixtures | TM Electronics

Open Package Test Fixtures

NEW

TS-01-EXP 12" Open Package Fixture

Flexible Package

Seal Strength Measurements:

Burst, Creep, Creep to Failure

 

As of February 2017 the TS-01-EXP supersedes the TS-01 and TS-01 HP

Use the TS-01-EXP with the TME BT-1000 Automated Package Tester  or TME BT Integra Pack to test flexible porous peelable pouches sealed on three sides. The TS-01-EXP can be used for non-porous welded pouches up to 30 psi. The 12-inch open package fixture provides a pneumatically driven clamp that will seal the open end of a flexible package during the inflation testing for package seal strength in accordance with ASTM F-1140.


TS-04 24" to 48" Manual Open Package Fixture

A similar seal is obtained with optional manual  or pneumatic clamp on the 24-inch to 48-inch model. The flexible materials of the clamp surfaces conform to the installed supply and sensor tubes, sealing the package material and test assembly. The supply/sensor probe is sealed on its outer surface to the inside of the package while it communicates with the internal volume, establishing a direct flow path to the measuring instrument.

TS-02 Open Package Test Fixtures | TS-01-EXP 12" & TS-04 24" to 48" Manual Fixtures | TM Electronics
air flow testing, air leak detection, air leak test, air pressure decay, blister testing, bubble leak testing of porous packaging, burst strength test, burst testing, card and blister packaging, component leak testing, compressed air leak testing, creep rupture testing, creep testing, creep to failure, fda qsr, flexible packages, flow testing, gross leak and fine leak testing, how to do package design testing, induction seal testing, iso 11607, leak detection, leak rates, leak testing, mass flow, medical devices, medical package testing, membrane burst strength test, package integrity testing, package testing, packaging, pressure decay, quality control, seal strength testing, seals, t.m. electronics, tm electronics, vacuum leak testing, validation, why package testing
TM Electronics designs and manufactures standard and custom size open package test fixtures, including TS-01-EXP 12" & TS-04 24" to 48". Call @ 1-800-370-0501 or Email:sales@tmelectronics.com.